Print…

You Searched For: Bubblers

Bubblers are specifically designed to maintain an inert atmosphere within reaction systems. Since splashing is common, double, gas, horizontal, mineral oil, and nitrogen formats are safer than the traditional mercury fill. If the pressure builds to exceed that of the laboratory atmosphere, excess gas will travel down the tube, bubble, and eventually escape through the hood opening. If the pressure is less though, the contained liquid in bubblers will rise to stop additional air from entering.

Bubblers are specifically designed to maintain an inert atmosphere within reaction systems. Since splashing is common, double, gas, horizontal, mineral oil, and nitrogen formats are safer than the traditional mercury fill. If the pressure builds to exceed that of the laboratory atmosphere, excess gas will travel down the tube, bubble, and eventually escape through the hood opening. If the pressure is less though, the contained liquid in bubblers will rise to stop additional air from entering.


54  results were found

Refine Results Sort by

Sort Results

List View Easy View
SearchResultCount:"54"

Rate These Search Results

Product Image-89059-342

Bottle (only)

Description: Bottle (only)
Catalog Number: 89059-342
Supplier: Ace Glass

Small Business Enterprise Product available on GSA Advantage®


Product Image-80064-564

BUBBLER, AIRFREE, ADJUSTABLE

Description: Replacement Components. Inner Tube Only. Bubbler has an adjustable inner tube with a #9 Chem-Thread. Taper at bottom of reservoir allows for use of a minimal amount of oil.
Catalog Number: 80064-564
Supplier: Chemglass

Small Business Enterprise


Product Image-80064-566

BUBBLER, AIRFREE, ADJUSTABLE

Description: Replacement Components. Reservoir Only. Bubbler has an adjustable inner tube with a #9 Chem-Thread. Taper at bottom of reservoir allows for use of a minimal amount of oil.
Catalog Number: 80064-566
Supplier: Chemglass

Small Business Enterprise


Product Image-80064-562

BUBBLER, AIRFREE, ADJUSTABLE

Description: Bubbler, Complete. Bubbler has an adjustable inner tube with a #9 Chem-Thread. Taper at bottom of reservoir allows for use of a minimal amount of oil. Complete bubbler consists of the lower reservoir, adjustable inner tube, compression nut and Viton O-ring.
Catalog Number: 80064-562
Supplier: Chemglass

Small Business Enterprise


Product Image-80064-556

BUBBLER, PRESSURE RELEASE, AIRFREE

Description: Bubbler, Complete. Unique design of bubbler allows for fine control of purge gas within an inert gas system such as a manifold. Purge gas enters bubbler thru hose connection (A) and exits thru connection (B).
Catalog Number: 80064-556
Supplier: Chemglass

Small Business Enterprise


Product Image-80064-554

BUBBLER, IN-LINE, AIRFREE

Description: Used to monitor gas flow to reactions while providing a vent to the atmosphere. Bubbler has a 'T' connection at the top to allow it to be mounted in-line. Reservoir head prevents oil from being sucked back into the system. Volume below the sidearm is approx. 40ml.
Catalog Number: 80064-554
Supplier: Chemglass

Small Business Enterprise


Product Image-80064-568

BUBBLER, AIRFREE, DOUBLE

Description: Similar in design to AF-0513 but with two oil reservoirs. Bubbler is approx. 135mm OAHx125mm wide. Hose connections have an O.D. of 9mm at the middle serration.
Catalog Number: 80064-568
Supplier: Chemglass

Small Business Enterprise


Product Image-80072-676

BUBBLER, PRESSURE RELEASE

Description: vacuum. HxWxD: 130x100x100mm. Used for the purging of AIRFREE of vacuum apparatus with an inert gas. The pressure release valve is connected on one side to the low pressure gas source and the other side to a manifold or reaction vessel.
Catalog Number: 80072-676
Supplier: Chemglass

Small Business Enterprise


Product Image-80064-442

MANOMETER/BUBBLER, DOUBLE, AIRFREE

Description: Adapter, 18/9 O-ring Ball jt to a hose connection. This mercury manometer/bubbler is a useful accessory for vacuum/inert systems. It can be used for Schlenk manipulations, transfer of approximate quantities of gases, and for measurement of intermediate pressures.
Catalog Number: 80064-442
Supplier: Chemglass

Small Business Enterprise


Product Image-80064-572

BUBBLER, HORIZONTAL, AIRFREE

Description: Joint size: 24/40. Horizontal design of bubbler allows for in line connection and purging of apparatus. Hose connection has a O.D. of 9mm. Complete with standard taper inner joint.
Catalog Number: 80064-572
Supplier: Chemglass

Small Business Enterprise


Product Image-80064-570

BUBBLER, HORIZONTAL, AIRFREE

Description: Joint size: 14/20. Horizontal design of bubbler allows for in line connection and purging of apparatus. Hose connection has a O.D. of 9mm. Complete with standard taper inner joint.
Catalog Number: 80064-570
Supplier: Chemglass

Small Business Enterprise


Product Image-80064-444

MANOMETER/BUBBLER, DOUBLE, AIRFREE

Description: Adapter, 18/9 O-ring Ball jt to 9mm O.D. tubing. This mercury manometer/bubbler is a useful accessory for vacuum/inert systems. It can be used for Schlenk manipulations, transfer of approximate quantities of gases, and for measurement of intermediate pressures.
Catalog Number: 80064-444
Supplier: Chemglass

Small Business Enterprise


Product Image-80060-126

MANOMETER/BUBBLER, SINGLE, AIRFREE

Description: Manometer/Bubbler only, Single Reservoir. Similar to the AF-0453-01 but with one reservoir. Overall dimensions are 50mm widex1200mm in height.
Catalog Number: 80060-126
Supplier: Chemglass

Small Business Enterprise


Product Image-89030-786

Bubbler

Description: High Capacity, with Check valve,28/15 Joint, 150mm OAH
Catalog Number: 89030-786
Supplier: Chemglass

Small Business Enterprise


Product Image-60000-726

BUBBLER 29/42 14/24

Catalog Number: 60000-726
Supplier: Kemtech America

Small Business Enterprise Minority or Woman-Owned Business Enterprise


Product Image-80072-626

CHECK VALVE BUBBLER TYPE LAR

Catalog Number: 80072-626
Supplier: Chemglass

Small Business Enterprise


33 - 48 of 54