Print…

You Searched For: Fume Hoods and Enclosures

Fume hoods provide the necessary protection for both the working materials and personnel. These enclosures serve as barriers against exposure that could be detrimental to tests or health. Available in ducted or recirculating formats, the front sash may be moveable and is constructed from clear safety glass for easy observation. Incorporated fans guarantee airflow remains constant and is pushed through high-quality filters to remove fumes or vapors.

Fume hoods provide the necessary protection for both the working materials and personnel. These enclosures serve as barriers against exposure that could be detrimental to tests or health. Available in ducted or recirculating formats, the front sash may be moveable and is constructed from clear safety glass for easy observation. Incorporated fans guarantee airflow remains constant and is pushed through high-quality filters to remove fumes or vapors.


157  results were found

Refine Results Sort by
SearchResultCount:"157"

Sort Results

List View Easy View

Rate These Search Results

Product Image-16126-672

SP Bel-Art Tapered Rear Exhaust Fume Hoods, Bel-Art Products, a part of SP

Catalog Number: (16126-672)
Supplier: Bel-Art Products, a Part of SP
Description: These corrosion-proof polypropylene plastic exhaust hoods are designed to rest on the rear edge of tanks and draw a stream of air across the top of the tank away from the operator.
Product Image-71001-854

SP Bel-Art Clear View Fume Hoods, Bel-Art Products, a part of SP

Supplier: Bel-Art Products, a Part of SP
Description: Safely vent noxious or potentially hazardous fumes and dust using Scienceware® Clear View Fume Hoods.

Product Image-76521-328

SterilGARD Biosafety Containment Cabinet, for CytoFLEX SRT, Beckman Coulter

Catalog Number: (76521-328)
Supplier: Beckman Coulter
Description: Class II Type biosafety containment cabinet designed specifically for the CytoFLEX SRT in collaboration with Baker Corporation, including aerosol evacuation functionality.
Product Image-10769-454

SpillStopper Work Surfaces, Labconco

Supplier: Labconco
Description: SpillStopper Work Surfaces are molded from a special formulation of corrosion-resistant epoxy resins

Product available on GSA Advantage®

Product Image-76319-168

Purifier® Logic®+ Class II A2 Biosafety Cabinets, Labconco

Supplier: Labconco
Description: Purifier Logic+ Class II A2 biological safety cabinet provide personnel, product and environmental protection from hazardous particulates.

Environmentally Preferable Irregular Voltage

Product Image-76319-970

Purifier® Logic®+ Class II B2 Biosafety Cabinets, Labconco

Catalog Number: (76319-970)
Supplier: Labconco
Description: Purifier® Logic®+ type B2 biosafety cabinets combine ergonomics, comfort and safety.

Environmentally Preferable Irregular Voltage


Product Image-470203-234

Paramount® and Paramount 360® Ductless Enclosures, Labconco®

Supplier: Labconco
Description: Self-contained ductless enclosures allow safe handling of organic, formaldehyde, acid gas, sulfur compounds, or ammonia chemical fumes and vapors.

Product Image-15202-652

Cupsink and Turret Kit for Basic™ Laboratory Hoods, Labconco®

Supplier: Labconco
Description: Kit includes a 7.6x15.2cm (3x6") polypropylene cupsink and chrome turret

Product Image-10830-866

Double Filtered Balance Enclosures, Labconco®

Supplier: Labconco
Description: The patented RXPert Double Filtered Balance System is a Class I Enclosure that meets the USP <800> requirements for non-sterile compounding with NO DUCTWORK! It provides user protection by keeping powders and particulates contained during hazardous drug manipulation

UL Listed Environmentally Preferable CSA Certified Product available on GSA Advantage®

Product Image-82010-676

XPert™ Easy-Order Balance Enclosure Systems, Labconco®

Supplier: Labconco
Description: These systems include an XPert balance enclosure with a Guardian™ Jr

Product available on GSA Advantage®

Product Image-10002-752

AtmoSense™ Oxygen Monitor, 115 V

Catalog Number: (10002-752)
Supplier: Labconco
Description: The AtmoSense™ Oxygen monitor is designed for general purpose trace oxygen detection as low as 1 ppm.

Product available on GSA Advantage®


Product Image-76449-822

Logic® Vue Class II Enclosures, Labconco Corporation

Supplier: Labconco
Description: Large Class II biosafety enclosures ideal for large instruments such liquid handlers, cell sorters and other automated equipment.

Environmentally Preferable Irregular Voltage

Product Image-76045-940

SpillStopper™ Work Surfaces for Protector® ClassMate™ Laboratory Hoods, Labconco®

Supplier: Labconco
Description: Solid epoxy work surfaces are 3.2cm (1<sup>1</sup>/<sub>4</sub>") thick, 65.7cm (25<sup>7</sup>/<sub>8</sub>") deep, and dished to contain spills.

Product available on GSA Advantage®

Product Image-77574-604

Logic® IV Bar Kits

Supplier: Labconco
Description: IV bar for Logic, mounting hardware and four hangers (two short and two long). Installation required.

New Product

Product Image-97041-718

Purifier® Cell Logic Accessories, Labconco®

Supplier: Labconco
Description: Purifier Cell Logic Class II Biosafety Cabinets are specially designed with cell researchers in mind, while also providing protection from hazardous particulates such as agents that require Biosafety Level 1,2 or 3 containment.

Product available on GSA Advantage®

Product Image-82007-278

Electrical Receptacle Kits for Basic™ Laboratory Hoods, Labconco®

Supplier: Labconco
Description: Kits include electrical receptacle, junction box, receptacle cover plate, and installation instructions

Product available on GSA Advantage®

Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
To process your orders without delay, please provide the required business documentation to purchase this product.

To order chemicals, medical devices, or other restricted products please provide ID that includes your business name & shipping address via email CMD_NA@vwr.com or fax 484.881.5997 referencing your VWR account number. Acceptable forms of ID are:

  • State issued document with your organization's Federal Tax ID Number
  • State issued document with your organization's Resale Tax ID Number
  • City or County issued Business License
  • State Department of Health Services License
  • Any other ID issued by the State that includes the business name & address

* ATTN: California Customers may require additional documentation as part of the CA Health & Safety Code. Products that fall under this regulation will be placed on a mandatory 21-day hold after documentation is received. VWR will not lift restrictions for residential shipping addresses.

-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at 1-800-932-5000.
33 - 48 of 157
no targeter for Bottom