You Searched For: Support Rods and Frames

A range of bases, rods, and connectors for assembly of retort stand setups. Use rod connectors when semi-permanent installations are required, holding rods firmly for a stable support system. Hard retort rods provide a smooth fit with lab frames. All rods are structurally strong and resistant to clamp compression scars, and certain models are immune to corrosion and rust due to the manner of their fabrication. All parts are sold separately for easy ordering of replacements.

A range of bases, rods, and connectors for assembly of retort stand setups. Use rod connectors when semi-permanent installations are required, holding rods firmly for a stable support system. Hard retort rods provide a smooth fit with lab frames. All rods are structurally strong and resistant to clamp compression scars, and certain models are immune to corrosion and rust due to the manner of their fabrication. All parts are sold separately for easy ordering of replacements.


120  results were found

Sort Results

List View Easy View
SearchResultCount:"120"
Description: Rod end connector holds rods or clamps firmly at 90 degree angle and are ideal for semi-permanent installations. Connectors come with two set screws and fit 13mm rods.
Catalog Number: 60079-010
Supplier: VWR International

Product available on GSA Advantage®


Description: Connector offers the maximum adjustment capabilities by holding rods at 90 degrees in horizontal and/or vertical configurations. Maximum rod diameter 13mm.
Catalog Number: 60079-053
Supplier: VWR International

Product available on GSA Advantage®


Description: Aluminum bracket with 140mm arm fastens to any shelf and accepts 13mm rods vertically and horizontally. Clamp opening is 43mm. Depth of grip is 50mm.
Catalog Number: 60119-001
Supplier: VWR International

Product available on GSA Advantage®


Description: Made entirely of stainless steel. holds 2 rods up to 13mm (0.5in) at 90 degree angles
Catalog Number: 89202-616
Supplier: VWR International

Product available on GSA Advantage®


Description: Versatile horizontal or vertical frame is 1220x1830mm. Lab-Frame includes (6) 51mm rods, (6) 305mm rods, (2) 610mm rods, (7) 1220mm rods, (5) 1829mm rods, 4 rod end connectors, 45 S-connectors, and 8 Lab-Frame feet. Wall mountable.
Catalog Number: 60078-006
Supplier: VWR International

Product available on GSA Advantage®


Description: Versatile horizontal or vertical frame is 1220x1830mm. Lab-Frame includes (6) 51mm rods, (6) 305mm rods, (2) 610mm rods, (7) 1220mm rods, (5) 1829mm rods, 4 rod end connectors, 45 S-connectors, and 8 Lab-Frame feet. Wall mountable.
Catalog Number: 60079-558
Supplier: VWR International

Product available on GSA Advantage®


Description: Low profile connector with sturdy aluminum construction allows rods to be held in cross-connection or perpendicular fashion. Maximum rod diameter 13mm. 25x22mm.
Catalog Number: 60097-055
Supplier: VWR International

Product available on GSA Advantage®


Description: Designed to fit 1.5m fume hoods. Includes four 127cm horizontal rods, five 91.4cm vertical rods, two 30.5cm base rods, two 45.7cm rear support rods, eight 5.1cm rods, 34 lattice connectors, four rod-end connectors, and four lab-frame feet.
Catalog Number: 14224-402
Supplier: VWR International

Product available on GSA Advantage®


Description: Designed to fit 2.4m fume hoods. Includes four 218.5cm horizontal rods, eight 91.4cm vertical rods, three 30.5cm base rods, two 45.7cm rear support rods, ten 5.1cm rods, 45 lattice connectors, four rod-end connectors, and six lab-frame feet.
Catalog Number: 14224-406
Supplier: VWR International

Product available on GSA Advantage®


Description: Designed to fit 1.2m fume hoods. Includes four 96.5cm horizontal rods, four 91.4cm vertical rods, two 30.5cm base rods, two 45.7cm rear support rods, eight 5.1cm rods, 30 lattice connectors, four rod-end connectors, and four lab-frame feet.
Catalog Number: 14224-400
Supplier: VWR International

Product available on GSA Advantage®


Description: Designed to fit 1.8m fume hoods. Includes four 157.5cm horizontal rods, six 91.4cm vertical rods, two 30.5cm base rods, two 45.7cm rear support rods, eight 5.1cm rods, 38 lattice connectors, four rod-end connectors, and four lab-frame feet.
Catalog Number: 14224-404
Supplier: VWR International

Product available on GSA Advantage®


Description: Large-capacity frame is 1220x1220mm with a 460mm wide base. Lab-Frame includes (10) 51mm rods, (3) 457mm rods, (2) 914mm rods, (10) 1220mm rods, 4 rod end connectors, 38 S connectors, and 6 Lab-Frame feet. Floor or wall mountable.
Catalog Number: 60079-556
Supplier: VWR International

Product available on GSA Advantage®


Description: Large-capacity frame is 1220x1220mm with a 460mm wide base. Lab-Frame includes (10) 51mm rods, (3) 457mm rods, (2) 914mm rods, (10) 1220mm rods, 4 rod end connectors, 38 S connectors, and 6 Lab-Frame feet. Floor or wall mountable.
Catalog Number: 60077-003
Supplier: VWR International

Product available on GSA Advantage®


Description: For use with chromatography cabinets and measures 610Lx610Wx1220Hmm. Includes eight 610mm rods, 4 rod end connectors, 4 Lab-Frame feet, 2 S-connectors, and 1 end-to-end connector.
Catalog Number: 60078-007
Supplier: VWR International

Product available on GSA Advantage®


Description: Mounting bars come with a channel coupler for use in regular and short form channels. Bars feature threaded ends for direct installation into channels. Locking nut included. Length is 152mm.
Catalog Number: 60079-106
Supplier: VWR International

Product available on GSA Advantage®


Description: Mounting bars come with a channel coupler for use in regular and short form channels. Bars feature threaded ends for direct installation into channels. Locking nut included. Length is 203mm.
Catalog Number: 60079-107
Supplier: VWR International

Product available on GSA Advantage®


1 - 16 of 120