You Searched For: Chemical Fume Hoods

Designed to guarantee laboratory conditions and researchers remain safe at all times, the chemical fume hoods protect against flammable or toxic chemicals. These protection devices have clear sashes that slide horizontally or vertically into place and support high working visibility. Constructed for maximum chemical resistance, the leak-proof enclosures will not corrode even with heavy routine use and corrosive spills. The chemical fume hoods circulate and filter air to eliminate possible vapors produced.

Designed to guarantee laboratory conditions and researchers remain safe at all times, the chemical fume hoods protect against flammable or toxic chemicals. These protection devices have clear sashes that slide horizontally or vertically into place and support high working visibility. Constructed for maximum chemical resistance, the leak-proof enclosures will not corrode even with heavy routine use and corrosive spills. The chemical fume hoods circulate and filter air to eliminate possible vapors produced.


544  results were found

Sort Results

List View Easy View
SearchResultCount:"544"
Description: Floor-Mounted Hood 10 feet XL with Horizontal Sliding Sash, 55.7inch Depth, 2 Service Fixtures, 2 GFCI Duplexes, Dimensions: 120.0inch wx55.7inch dx95.0inch h, 115 volts, 60 Hz
Catalog Number: 10222-156
Supplier: Labconco

UL Listed CSA Certified Product available on GSA Advantage®


Description: Floor-Mounted Hood 12 feet XL with Horizontal Sliding Sash, 37.7inch Depth, 2 Service Fixtures, 2 GFCI Duplexes, Dimensions: 144.0inch wx37.7inch dx95.0inch h, 115 volts, 60 Hz
Catalog Number: 10222-158
Supplier: Labconco

UL Listed CSA Certified Product available on GSA Advantage®


Description: Floor-Mounted Hood 10 feet XL with Horizontal Sliding Sash, 43.7inch Depth, 2 Service Fixtures, 2 GFCI Duplexes, Dimensions: 120.0inch wx43.7inch dx95.0inch h, 115 volts, 60 Hz
Catalog Number: 10222-154
Supplier: Labconco

UL Listed CSA Certified Product available on GSA Advantage®


Description: Floor-Mounted Hood 12 feet XL with Horizontal Sliding Sash, 43.7inch Depth, 2 Service Fixtures, 2 GFCI Duplexes, Dimensions: 144.0inch wx43.7inch dx95.0inch h, 115 volts, 60 Hz
Catalog Number: 10222-160
Supplier: Labconco

UL Listed CSA Certified Product available on GSA Advantage®


Description: For 1.8m hoods. Allows hood to operate on up to 70% auxiliary air, saving conditioned room air from being exhausted. Cold-rolled steel. Light neutral color finish. Static pressure @ 80fpm is 0.15" (730cfm); @ 100fpm is 0.25" (900cfm); @ 120fpm is 0.30" (1090cfm).
Catalog Number: CF5-1372-03
Supplier: Kewaunee

Product available on GSA Advantage®


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 4 feetx25.88in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left/Right side pre-cut 6inx3in oval sink cutouts
Catalog Number: 76045-928
Supplier: Labconco

Product available on GSA Advantage®


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 6 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Right side pre-cut 6inx3in oval cupsink cutout
Catalog Number: 76045-940
Supplier: Labconco

Product available on GSA Advantage®


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 6 feetx25.88in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left/Right side pre-cut 6inx3in oval sink cutouts
Catalog Number: 76045-686
Supplier: Labconco

Product available on GSA Advantage®


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 6 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Pre-cut 6inx3in oval cupsink cutout optional
Catalog Number: 76045-936
Supplier: Labconco

Product available on GSA Advantage®


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 4 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Pre-cut 6inx3in oval cupsink cutout optional
Catalog Number: 76045-924
Supplier: Labconco

Product available on GSA Advantage®


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 4 feetx25.88in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left side/Right rear pre-cut 6inx3in oval cutouts
Catalog Number: 76045-932
Supplier: Labconco

Product available on GSA Advantage®


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 6 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left rear pre-cut 6inx3in oval cupsink cutout
Catalog Number: 76045-942
Supplier: Labconco

Product available on GSA Advantage®


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 5 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Pre-cut 6inx3in oval cupsink cutout optional
Catalog Number: 76045-934
Supplier: Labconco

Product available on GSA Advantage®


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 4 feetx25.88in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left rear/Right side pre-cut 6inx3in oval cutouts
Catalog Number: 76045-930
Supplier: Labconco

Product available on GSA Advantage®


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 4 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Right rear pre-cut 6inx3in oval cupsink cutout
Catalog Number: 76045-926
Supplier: Labconco

Product available on GSA Advantage®


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 6 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Right rear pre-cut 6inx3in oval cupsink cutout
Catalog Number: 76045-938
Supplier: Labconco

Product available on GSA Advantage®


113 - 128 of 544